Welcome! This forum is for USAPLTM and IPF members, coaches and supporters to discuss USAPL and IPF issues. Non-members are welcome. Please follow these few guidelines:
  1. Use an email address. (Only moderators can view it)
  2. No spam/advertisements. USAPL meet notices are ok.
  3. No personal attacks.
  4. No federation bashing.
  5. Keep bad language to a minimum.
The views and opinions expressed on this forum do not necessarily reflect those of the USAPLTM.

  

PowerLines
The Official USAPL Electronic Newsletter

| USA Powerlifting | International Powerlifting Federation |

The Unofficial USAPL Powerlifting Forum!

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Re: Rage Bench Shirt

Posted By: Dean From Oregon
Date: Tuesday, 14 November 2006, at 8:04 p.m.

In Response To: Rage Bench Shirt (Ryan)

You're just not getting it seated all the way. You realy do have to get it all the way up the arms, shoulders pulled back, and pulled down in the front a bit in order to have it fit right. Could also be the shirt fit.

It does take a bit to figure out but you'll get it figured out.

You really have to work it up the arms to get in your opener.

Once you get it to where you can touch without choking you, then you can get more advanced with holding down the front with the belt and pulling the arms and front panel down. It really is a science to get it dialed in but once you figure it out you will realize it's a pretty simple problem to correct.

If you like you can email me at squatfuquin800@yahoo.com and I can talk you through some of thisa stuff.

Dean

Password:

Messages In This Thread

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

USAPL Powerlifting Forum is maintained by Administrator with BBB .

The views and opinions expressed on this forum do not necessarily reflect those of the USAPL.